UHF Radio with Rubber Antenna

This extremely robust fibreglass radome antenna is constructed with heavy-duty stainless steel fittings, ideally suited to 4WD bullbar mounting.

Features

• 80 Narrowband Channels
• Ultra compact micro size
• Flip LCD function
• Automatic level control (ALC) for consistent audio levels
• Heavy-duty microphone with volume control
• 38 CTCSS and 104 DCS Codes
• 7 Colour backlit display
• Duplex (range extender)
• Open/Group Scan
• Priority channel
• Rotary channel select
• Digital squelch control
• Busy channel lockout
• Die cast metal chassis with integrated heat sink
• Optional external speaker (3.5mm jack)
• Designed and engineered in Korea
  

Specifications

• Compliance AS/NZS 4365:2011
• Dimensions of transceiver: 22.5(h) x 100 (w) x 84 (d) mm
• Frequency Range 476.425 - 477.4125 MHz
• Number of TX/RX Channels 80 UHF CB (75 Voice channels)
• Channel Spacing TX/RX 12.5KHz
• Operating modes Simplex, Repeater TX offset (+750kHz)
• Scanning Speed 130 msec per channel
• Automatic Level control (ALC) For consistent audio levels
• Antenna Impedance 50 Ohms
• Operating Volts nominal 13.8 VDC
• Operating Volts Range 10 to 15 VDC
• Over Voltage Protection voltage regulator
• Over Current Protection 2 Amp fuse
• Reverse Polarity Protection Series diode
• Frequency Stability +/- 2.5ppm
• Transmitter:
• RF Output Power 5 watts max.
• Modulation F3E (FM)
• Maximum Deviation 2.5KHz
• Spurious Emissions < -70 dBc
• TX Audio pre-emphasis + 6dB/octave from 300Hz to 3kHz
• Current Consumption during TX 1.5 Amps with 50 Ohm antenna termination
• Receiver:
• Circuit Type Dual conversion superheterodyne
• IF Frequencies 1st IF = 21.4MHz , 2nd IF = 450kHz
• Current Consumption during RX 200mA
• Sensitivity < -121 at 12dB SINAD
• Selectivity +/-3.75kHz min @ 3dB to +/-15kHz max @ 40dB
• Intermodulation Immunity > 70dB
• Spurious Immunity > 70dB
• Audio Output Power 3 Watts Maximum
• RX Audio de-emphasis -6dB/octave 300Hz to 3kHz
• Audio frequency response 300Hz to 3kHz

Package includes:

• 1 x UHF Radio base
• Ducky Rubber Antenna
• 4m Cable
• PL259 Connector

Shipping: FREE Australia wide.

Shipping: FREE Australia-wide. 

Delivery: Under normal conditions, delivery will take between 2 and 12 working days, depending on your location. Please note: remote areas may require longer delivery time. Delivery couriers may be affected over the public holidays period. A tracking number will be provided with your order.

Christmas Delivery Notice: Please be aware that delivery times are estimates and cannot be guaranteed. During this busy holiday season, delays may occur due to the increased volume of parcels handled by couriers and Australia Post. We appreciate your patience and understanding.

For PRE-ORDER items: If the listing is tagged as "PRE-ORDER ONLY", please add the dispatch time to the estimated delivery timeframe.

• We sell brand new genuine products at remarkably low prices

• We are 100% Australian owned and operated, ensuring efficient shipping and response time

• We are committed to customer service and customer satisfaction, please contact us if you need any assistance

If you’re not 100% satisfied with the items you purchased, you can return the item for a refund or exchange within 14 days purchase. Please contact us via the Contact us page with your enquiry and check our Returns & Refunds Policy below for more details.